-
wedi tile profiles
- Stainless steel tile profiles
- Special stainless steel tile profiles
- Brass tile profiles
- Aluminium tile profiles
- Plastic tile profiles
- Movement and expansion joint profiles
- Tile profiles for balconies and terraces
(thick bed process) - Tile profiles for balconies and terraces
(thin bed process)
Further Information:
Stable and effective:
wedi Objekt expansion-joint adhesive profiles
wedi Objekt expansion-joint adhesive profiles, with a surface finish that is resistant to wear, are ideally suited to installation using the thin-bed method.
They maintain their shape and are highly functional.
nstalled at least flush with the tiled surfaces, these profiles offer the utmost protection to tiling which is subject to stress, in particular in public and commercial buildings (test report by “Säurefliesner-Vereinigung e.V., Testing and advisory institute for wall and floor coverings”).
With their bevelled edges, they are easy to set under the tiles. They are installed as the tiles are laid. The grooves on either side allow for good adhesion to the tile adhesive.
From robust to flexible:
wedi Objekt expansion joint profiles
wedi Objekt expansion joint profiles 501 are a functionally reliable and robust form of edge protection for laying in a bed of mortar.
wedi Objekt expansion joint profiles 502 and 503 are sturdy expansion joint systems offering optimum flexibility when used in the vibration bed process and in tile, natural stone and screed coverings.
Triple strength:
wedi Triolos expansion joint profiles
wedi Triolos expansion joint profiles are the practical solution to the problem of expansion joints indoors and outdoors. The special design of the attachment limbs, created to be snapped at specific points, gives you absolute flexibility during tiling.
The profiles are worked in directly, and the fluting along either side of the profile edges help to achieve much improved adhesion between the expansion joint profile and the tile adhesive.
The wear-resistant surface has a dull matt finish and is adapted to match the joint between tiles both in terms of shape and look.
Since both side limbs can be snapped off, this allows it to be guided along rounded joints.
It can easily be affixed to existing floor coverings by snapping off a complete limb on one side. This guarantees the optimum absorption of movement.