Quick and easy fitting of wall-mounted WCs

wedi I-Board is a prefabricated fitting element for cladding with wall-mounted WCs. With a width of 1,200 mm, it can easily be adapted to virtually all specific needs. Despite its light weight, it is extremely strong and stable. The installation cladding board can be tiled directly after fitting without the need for further pretreatment.

First cut the wedi installation cladding to the required size with a utility knife.

Using a jigsaw, cut out a suitable opening for the flush actuator.

Using a cordless screwdriver, fasten wedi Tools washers to the wall carrier frame with drywall screws (at least three fastening points per side).

Now attach the previously cut strips of wedi I-Board to the top and sides using wedi 610 adhesive sealant.

Cover the joints with wedi Tools reinforcement tape embedded in standard thin-bed mortar or wedi Tools self-adhesive reinforcement tape. In wet areas, finish the joints with wedi Tools sealing tape or wedi 610 adhesive sealant.

The installation cladding boards can be tiled directly without further pretreatment. The joints between the wall covering and the flooring and the corner joints of the wall covering must be treated as expansion movement joints.